Please login or register.


Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - shaggy

Pages: [1] 2 3 4
General Discussion / Giant Scale Rally
« on: August 15, 2014, 08:25:10 AM »
Would someone mind holding a spot for my sunshade for Saturday?
I'll be coming down from Barrie and wont get there till Sat morning.


General Discussion / Rumours are true
« on: February 02, 2014, 12:10:28 PM »
I just wanted to let you all know that if you heard a rumour  that I'm moving its true.

We put our house on the market last week and are heading to Barrie in June.
It's a work move for go further in the OPP I need to be in the Orillia area  :(

I would really like to take a moment to thank everyone in KRCM for welcoming me back to the world of RC.
The last few years have been great. I fully plan on being back for most events, especially the Giant Scale rally.

So.......does anyone know of a decent club in the Barrie/Orillia area?  ;D

Shaggy (Shawn)

General Discussion / Scale Dutch F-16
« on: August 31, 2013, 07:19:26 AM »
If you have a few minutes take a look at this video.
Everything on this jet is hand made, including the jet engine!!!
All maching is done by hand as well, no CNC at all

Leets see all of you pics from this years event!!

General Discussion / CDI for gas engine
« on: August 10, 2013, 07:26:35 PM »
Well, I've narrowed down the issue with my motor to a faulty CDI
Good news - someone is bringing one to the Giant Scale meet for me :)
Bad news - I wont be able to fly my MSX-R till after then.

Does anyone have a spare CDI for a gas motor I could borrow so I can try to get my plane maidened before then?
It's for a DLA56, as long as its for a CM6 plug is should work fine (I think)
If I can get the plane maidened I can fly it next weekend :)

General Discussion / Engine help
« on: August 05, 2013, 03:24:06 PM »
Hey Gord,
Any chance you can give me a hand with a dla56?
Cant get the damn thing to run.

General Discussion / Airplane/Helicopter cross
« on: August 01, 2013, 06:31:09 PM »
What happens when you cross an airplane with a helicopter?
One hell of a flying machine
Check it out !! takes a look at Arron Bates' Super Honey Badger on Vimeo

After watching Dwayne fly I'm thinking I need to give this a try  :D

Control line


So my final flight of the night ended in a perfect spot landing  :)

General Discussion / Orange DSMX
« on: June 05, 2013, 01:28:39 PM »

General Discussion / Great Digital MG servos and cheap to boot
« on: May 13, 2013, 04:22:05 PM »
Looking for a good value metal gear servo?
These puppies have 222oz at 6volts
All for $42 at Leading Edge

This is the Savox SC-0251 High Torque Metal Gear Digital Servo.

Precision metal gears form a strong and solid framework
Strict production and quality control of plastic components ensures high performance
Our servos are totally green – from materials to production, these servos are environmentally friendly.
This high torque servo is great for crawlers, 1/8 scale vehicles and 50 class airplanes.
Dimensions(mm):  40.7X19.6X42.4
Weight(g):  61.0
Speed(@4.8V sec/60):  .20
Torque(@4.8V oz-in):  180.5
Speed(@6.0V sec/60):  .18
Torque(@6.0V oz-in):  222.2
Gear:  Metal
Bearing:  2BB
Case:  Plastic
25 Tooth Spline

General Discussion / EME 35 engine giveaway
« on: May 02, 2013, 05:35:41 PM »
Anyone need a new engine?
RC Canada is giving one away!,

General Discussion / Weak Signals Toledo
« on: March 17, 2013, 09:52:44 AM »
Norma and I are going to be heading down for the show.
Any suggestions on where to stay?
And who all is going?

This is the place to try to organize a posse and get out flying.

We will try to post any updates regarding snow-plowing.

Remember....just hit "new topic" on the level above this and start a topic with the date you're going out in the Subject line.

If you select "notify" option, just over a couple of notches from the "reply", you can get automatic email notification of new posts in this, the "Who's Flying Today" Forum.

General Discussion / Sarson
« on: February 21, 2013, 05:33:26 PM »
Does anyone have a cell number for Jeff?
Can you PM me it?

Pages: [1] 2 3 4