Please login or register.


Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Dwayne

Pages: [1] 2 3 ... 6
General Discussion / HE'S ALIVE!!
« on: February 19, 2018, 06:56:23 PM »
Waahaahaa, the sparks were flying as the grinders ground, the electricery flowed as I worked, it took everything I had but I did it, after many hours of sweat and toil Super Dude lives  and will fly again!!.  ;D 8) :P :laugh:

General Discussion / JR files bankruptcy
« on: January 01, 2018, 09:17:29 AM »
JR has filed for bankruptcy and will close it's Japan factory, another one bites the dust?  :'(

General Discussion / RIP Gord
« on: November 22, 2017, 10:33:38 PM »
I guess you all know by now, our good friend and fellow flyer Gord flypaper Clifford has gone to the great toy ground in the sky. God speed my friend you will be greatly missed!!  :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(

Plans, Projects, Building and Flying Tips / Fokker DVIII Build (updates)
« on: October 28, 2017, 08:28:05 PM »
I won a 1/3rd scale Fokker DVIII at this years giant scale and have decided to build it. I decided to do the wing first as if I screw this part up there's no need to  :P  The  DVIII has a unique wing in that it is flat on the top and tapers on the bottom so it is recommended to build the wing upside down I used an old hokey stick and some weights to keep things aligned while gluing, hey it worked. lol  :P  other than that it's pretty straight forward, the wing is split in the middle so you build one panel at a time, so far so good but man this thing is big.   :o :o 8) :P ;D

General Discussion / Ok dumb question time
« on: September 07, 2017, 09:08:35 AM »
So what the heck is a Huckfest and where did the term come from, all I can find on google is jumping off road trucks, so what's up?
  ???  ;D :P

So you think this would be a fair fight?  :laugh: :P :o ;D

« on: July 02, 2017, 02:23:27 PM »
 Lost the elevator , haven't tested it yet so don't know if it was the servo or receiver.  I got it back to the runway and ohhhh sooooo close to bringing her in but alas she stalled and knocked the gear and nose off, oh well a couple of day's in the shop and she'll be good as new. But CRAP DRATS RATS AND FUDGE!!!!  >:( >:( >:( >:( >:( >:( >:( >:( >:(

Plans, Projects, Building and Flying Tips / Foam cutter?
« on: June 29, 2017, 06:31:14 PM »
Anyone out there know where I can barrow one or could someone cut me parts for a wing core?

General Discussion / Gary
« on: June 11, 2017, 12:24:05 PM »
Any luck? Or she gone :(

General Discussion / WOOHOO Second place!! (Update, video)
« on: June 03, 2017, 05:22:09 PM »
I'd like to thank my sponsor   :P ;D ;D
Ok a little back story, I decided to try a little control line racing in Toronto this year and Gary was kind enough to supply an engine for me, well I'll be darned if I didn't  come in second.  ;D ;D ;D But there is a bit of bad news though, I could of won if I hadn't blown a pit stop.  >:( >:( . But hey that's how it goes and I'll get em next year. 8) ;D :D

General Discussion / Court reverses FAA'a registration rule
« on: May 20, 2017, 06:44:26 PM »
Well it seems common sense has finally won over silly bureaucracy, a court has ruled the FAA can't make anyone register their models.

General Discussion / $40.00 auction buy
« on: May 10, 2017, 08:19:54 PM »
So what does 40 bucks get you these day's? If you get lucky at an auction it can get you one fine running OS 91 Surpass!  ;D 8) :P :D

General Discussion / Check out this indoor giant.
« on: April 27, 2017, 08:04:44 PM »
What do you think Gord? Can you top this one?  8) :P :o

Plans, Projects, Building and Flying Tips / LA 15 Control line racer
« on: April 18, 2017, 10:52:59 AM »
My Control line club in Toronto has started a new spec engine racing event which I must be part of.  8) ;D
My model of choice is the Sig Shoestring, should be a fun event.  ;D ;D

Plans, Projects, Building and Flying Tips / Here you go Gord
« on: February 12, 2017, 07:45:40 PM »
As you said it doesn't have to be perfect and lord knows it  :P But what the hey it looks ok to me and you best watch out or my super rapid fire machine gun'll  ;D 8) :P :laugh:

Pages: [1] 2 3 ... 6